The Horse 2020/21

Environment & Technology

Research: City trees and their diseases

Brown spot disease

Affected tree species

mountain pine, Scots pine, Scots pine, black pine

First occurrence

2012

Damage pattern

First yellow, then brown, 1 to 2 mm large spots with yellow edges appear on the needles. Finally, the needles become completely brown and die off. The disease usually starts at the lower branches near the ground and then spreads towards the top of the tree. The disease discolors perennial needles brown from about June. Freshly sprouted needles appear green and healthy at the beginning, they become infected later. In the case of heavy infestation, even the youngest needle vintages can fall ill and the tree dies.

The brown spot disease can be confused with the red band disease, an insect infestation or the physiological needle shed. A microscopic examination is necessary for a clear diagnosis.

Risks
Needle browning results in a strong optical impairment. However, there is no safety hazard. Heavily infested trees can die off completely.

Countermeasures
No countermeasures are known. Because of the danger of the disease, infested plants must be cleared and destroyed. Due to the risk of infection, this measure should not be carried out in damp weather or rain.

Obligation to report
Yes



Boxwoodzünsler

Affected tree species
Boxwood

First occurrence
2007

Damage pattern
Young larvae cause the so-called window feeding. Typical for this feeding pattern is that the lower epidermis of the leaf is left intact, which appears like a window. Later, the whole leaves and even the shoot bark are eaten. As the larvae spin into leaves to moult, an infested boxwood plant often appears sticky. On closer inspection, small caterpillars and excrement crumbs can then be discovered between the leaves.

Risks
Heavy infestation leads to total loss of the plants. Since the European borer produces up to three generations per year in Central Europe and is avoided by predators due to the toxicity of the fodder plant, the pest can multiply and spread explosively.

Obligation to report
No


Horse chestnut leaf miner moth

Affected tree species
Horse chestnut, red horse chestnut, sycamore maple

First occurrence
2000

Damage pattern
From mid-May on, punctiform bright spots appear on the upper side of the leaves, which first enlarge comma-like and finally expand to spots of several centimeters in size. In the course of the summer, these can cover the entire leaf surface, whereby an increasing brown coloration of the damaged tissue also occurs. The "stains" are feeding tunnels caused by the larvae living in the leaves. These are yellowish in color and are strikingly strongly segmented. The larva pupates and a butterfly with bronze colored wings with white bands hatches from the pupa. The butterfly in turn lays eggs on the leaves from which larvae hatch after about 14 days, which in turn eat into the leaves. A total of three (to four) generations are formed each year, with the main flight times being in May, July and September.

Risks
In case of a strong infestation, almost the entire crown can be affected. Heavily infested leaves die and show premature leaf fall, which is why many horse chestnuts are almost leafless from about August onwards. A complete death of a tree solely due to a leaf miner moth infestation has never been observed so far. But the premature loss of leaves will probably weaken the trees in the long term and make them more susceptible to other harmful organisms.

Obligation to report
No


Massaria

Affected tree species
plane tree

First occurrence
2008

Damage pattern
The symptoms are difficult to detect visually from the ground. On the upper side of the branch there is often a stripy red or pink discoloration. The branches turn black in a later stage due to the spores of the fungus. The infestation becomes obvious by partial or complete death of branches of the lower and middle crown. The dying process can proceed very quickly, even with strong boxes, sometimes within a few months.

Risks
Dying and dead branches are prone to break within a few months and therefore represent a high safety risk.

Obligation to report
No

E-cars in cities

We have broken our research into three parts (but we're still not finished with planning):

- We inform ourselves about electric cars
- We are looking for information about environmental change through e-cars
- We do interviews and organize an electric car

Our first questions are:

How far does an average electric car get?
- about 450 km.

How are they built and what are the advantages and disadvantages?
research - Link to the answer

Are there different types of electric cars?

- Yes, electric hybrid, plug-in hybrid, possibly water cars.
research - Link to the answer

 How did they get the idea?
- The idea came to the car companies through various protests from people about the environment.

Is there research by specialists?

- Answer not found yet.

The environment changes a lot because of the electric cars.
They are very environmentally friendly. They have 0 CO2 emissions and other pollutants. They are also very quiet and do not disturb anybody. The only disadvantage I have read so far is that they are too expensive and the charging stations are limited. I can understand this, because I think that you can't mass produce a new product when it is fresh on the market. You also have to see if you can find enough customers and if it is worth to continue production. But in my opinion the electric cars are very well received. You can see this especially with the Tesla car brand. I see at least 4-5 Teslas every day and that is a lot for a car with electric power.

We were lucky and have already organized an interview. We don't know yet how and when we will be able to do it, but it has been granted to us. We have also been given an electric car to look at and drive on Zurich with this car. I am very much looking forward to this day, because I am very interested to see the reaction of various people in Zurich. What also interests me is how it looks exactly in the car and under the hood. From these experiences we try to capture various things with videos.

 

         

Link to TCS information

10 facts of e-cars

History of e-cars

in progress....

 

Research - Effects of buildings on climate & environment

Our research is divided in two areas, one for each part oft the project. The aim of both areas is to determine which factors are vital to find out which building material is the best and which facade ist he best.

In the first part we came to the conclusion, that there are several properties we need to consider to determine the optimal building material:

Ecological properties of building materials :

  • Energy requirements for production, transport and disposal
  • Pollutant emission during production, processing, use and disposal
  • Use of recycled material
  • durability, easy to repair
  • Reusability
  • Regionality

Furthermore we already searched for the conventional building materials that we could use to create the model.  We will use the following building materials for our model:

  • Natural stone
  • Brick
  • Concrete
  • Steel
  • Wood

In the second part we looked for factors to measure the impact of the different facades on the climate. We found out that the microclimate is crucial for our project. The microclimate is the climate close to the ground up to a height of 2 metres, or the climate that prevails in a small, precisely defined area. In our case we observe the microclimate of a city

Regarding the microclimate, the reflection of the facade is decisive. In the past, there has been criticism that glass facades can produce a very hot reflection of up to 100 degrees, which is extremely harmful to the microclimate. Currently, the impact of microclimate is not taken into account when distributing sustainability certificates. The reflection causes the floor to heat up critically. It also turned out that planted facade, according to our expectations, the optimal facade is, while glass will be one of the worst.

https://www.fachwerk.erz.be.ch/fileadmin/user_upload/Downloads/Module/Modul4.pdf
https://www.energie-experten.org/bauen-und-sanieren/baustoffe
https://klima.org/wissen/mikroklima/
http://www.gruenstadtklima.at/mikro.htm
https://www.espazium.ch/de/aktuelles/glasfassaden-eine-gefahr-fuer-ihre-umgebung
https://www.oekologisch-bauen.info/baustoffe/dach/fassadenbegruenung/#:~:text=Die%20positiven%20Auswirkungen%20einer%20begrünten,Umgebungsluft%20gebunden%20und%20Sauerstoff%20gebildet.
https://www.urban-hub.com/de/sustainability/innovative-baumaterialien/
https://www.umweltnetz-schweiz.ch/themen/ressourcen/33-beton-–-bauökologisch-sinnvoll.html

 Justin & Dario

Electric Cars in cities

Nils and Me(Dylan)

We searched the internet for various information about the environment in Zurich and about e-cars. We found very interesting things, which we want to inform ourselves about.

- For example how the environment is changing due to the invention of electric cars.
  Or how an electric car is built together.
  The electric car affects the environment.
  How many people already drive electric cars.
  Do electric cars also have disadvantages.

  etc.

Also we were able to organize a BMW I3 through connections and are allowed to drive this car and also have a closer look at it. Also we have already organized an interview, which we can do either online or face to face. But we will have to do some more planning, so that our project will be good.

                    

in progress...

Research: City trees

Neophyte:

  • We have planned to visit a booth at the marketplace in Oerlikon on October 24, 2020. The host "Natur liegt Nahe" would have a booth where they would educate about neophytes.
  • We have prepared questions for the excursion.
  • I went to the Oerlikon marketplace on October 24, 2020, and gathered information and sources. I also interviewed Julia Fürst, a master student in "Biodiversity and Conservation Biology" and "Nature Conservation Biology" who works in the federal research institute in Birmensdorf. She answered our questions. She also gave me more basic information about the problem.

(Work in progress)

sustainable pasta

first research (part 2):

How to know your food is sustainable?

  1. what's in your pasta?
  2. where do your products come from?
  3. factors sustainable or not sustainable?

spaghetti with veggie bolognaise

ingredients

Place it comes from -> distance

spaghetti (dry weight), 320 g

 

red onions, 2

India – Begium: 7.058,35 km

Asia – Belgium: 7.542,46 km

carrots, 3

 Central Asia - Belgium: 4.669 km

green celery, 2 stems

 Switzerland - Belgium: 646,5 km

tomato cubes, 800 g

Central Amerika – Belgium: 9.040,47 km

South Amerika – Belgium: 9.598;41 km

garlic, 2 cloves

China – Belgium: 7.733,76 km

Asia – Belgium: 7.542,46 km

red wine, 1 glass

 France - Belgium: 657,8 km

Puy lentils (dried), 100 g

 France - Belgium: 657,8 km

bay leaves, 2

Can be grown in your own garden

herbs (dried, such as oregano and basil)

France - Belgium: 657,8 km

Italy - Belgium: 1.439,1 km

England - Belgium: 537,04 km

olive oil, 2 tablespoons

the Mediterranean - Belgium: 2.085 km

sustainable:

  • You can grow bay leaves at home
  • it has no meat -> veggie

not sustainable:

  • the distance is too big

penne all’arrabbiata

ingredients

Place it comes from -> distance

500 g penne

 

3 onions

India – Begium: 7.058,35 km

Asia – Belgium: 7.542,46 km

6 tomatoes

Central Amerika – Belgium: 9.040,47 km

South Amerika – Belgium: 9.598;41 km

3 decilitres tomato pulp in cans or bricks

Central Amerika – Belgium: 9.040,47 km

South Amerika – Belgium: 9.598;41 km

2 cloves

 Indonesia - Belgium: 11.429 km

1 red chilli pepper

 Mexico - Belgium: 9.115 km

olive oil

the Mediterranean - Belgium: 2.085 km

150 g Parmesan cheese (block)

Italy - Belgium: 1.439,1 km

sustainable:

  • it has no meat -> veggie

not sustainable:

  • the distance is too big

Research - urban gardening

Research about this topic:

What is urban gardening?

Urban gardening came from the USA to Europe and got big in the '90s. The focus is on beautifying and enriching life in the city and creating new communities. It has many different types of urban gardening. These different types you can find in the first link. 
The motto of urban gardening is recycling instead of high-tech, creativity instead of professionalism.

Urban Gardening and Urban Farming have existed since the construction of urban developments. The lack of transport facilities and the short shelf life of food made it impossible to produce it in regions far away from the demand for this food. With increasing globalization and improved transport routes, the knowledge of how to grow vegetables and fruit was then lost again.
Nowadays, a large part of the urban population is again interested in producing their own vegetables and fruit.

In Switzerland, we have many shops where you can buy things for urban gardening. For example in the second link there you can find a shop in Wädenswil, Switzerland.

Link 1 - what is urban gardening (reset.org)

Link 2 - urban gardening shop

Link 3 - urban gardening information

This is a balcony from Oerlikon, Zürich where the resident does urban gardening.

For this research, I took 30min of my time.

 

Step 2 - Project research: Urban gardening

Urban Gardening is the horticulture in cities, which is mostly small-scale. Typical examples in the city are courtyard and roof gardens. Urban Gardening has always existed, but the importance of this horticultural use of urban areas is growing. It's about sustainability, about the vegetables on your doorstep, also about cost reduction and last but not least about the important ecological aspects.

We want to teach our class members and other interested people how exactly such a garden works. On the internet you can read a lot about urban garding. During our project work we could perhaps interview a landscape gardener and learn more about the cultivation. We want to publish this information in order to motivate as many people as possible to run such an ecological garden.

 Link: www.gartenbau.org

Simon Leuzinger & Luca Hofmüller